Cassette Fixing - narrow joint

 

Suitable for application on both existing and new constructions

SOLIDAL® T3® (3mm) and T4® (4mm) narrow joint cassette installation is designed for rainscreen - open joint installation on external areas such as walls and soffits. Double-folded edge Solid Aluminium Cassette is a cost effective solution, that is pre-fabricated in a factory environment according to clients requirements. Delivered directly to site ready for installation or to clients factory for inspection prior to the install process. 

 

A large variety of designs can be achieved with SOLIDAL® pre-fabricated Cassette modules. For large SOLIDAL® cassette modules, the combination of supporting stiffeners and internal angles are fixed to back of SOLIDAL® sheet, and either spot welded or fixed with structural adhesives, to ensure strength of module and flatness is maintained. The use of additional supporting angles and stiffeners is dependent on size of SOLIDAL® modules.

 

Calculations are completed on a project by project basis, so the SOLIDAL® Cassette modules are not over or under engineered for the required application.


Contact SOLIDAL® for general guidelines and recommendations.

SOLIDAL® T3® 

SOLIDAL® T4® 

Panel Thickness (mm)

3mm

4mm

Standard Width (mm)

900mm, 1200mm

900mm, 1200mm

Standard Length (mm)

3000mm, 3600mm

3000mm, 3600mm

Fold size (mm)

20mm

20mm

INSTALLATION: cassettes are installed on sub-frame such as top-hats using appropriate size fasteners on outward folded edge and 3M® Tape or structural silicone on inward folded edge.

JOINT WIDTH: it is possible to achieve a very narrow, 'shadow' joint using this application system. Fixing is not visible.

 

Custom sizes available on request

© 2019 Watermark® International Pty Ltd. All rights reserved.