SOLIDAL® Application systems

PRODUCTS / CASSETTE / CASSETTE 12

Joint Options

1 - SOLIDAL

2 - Staggered Aluminium Angles

3 - Stiffener for cassettes longer/wider than 600mm

4 - Sub-framing (Top Hat)

5 - Sarking

6 - Main Structure

Parapet Capping Detail

1 - SOLIDAL

2 - Staggered Aluminium Angles

3 - Stiffener for cassettes longer/wider than 600mm

4 - Sub-framing (Top Hat)

5 - Sarking

6 - Main Structure

Soffit Details

1 - SOLIDAL

2 - Staggered Aluminium Angles

3 - Stiffener for cassettes longer/wider than 600mm

4 - Sub-framing (Top Hat)

5 - Sarking

6 - Main Structure

Window Details

1 - SOLIDAL

2 - Staggered Aluminium Angles

3 - Stiffener for cassettes longer/wider than 600mm

4 - Sub-framing (Top Hat)

5 - Sarking

6 - Main Structure

Door Details

1 - SOLIDAL

2 - Staggered Aluminium Angles

3 - Stiffener for cassettes longer/wider than 600mm

4 - Sub-framing (Top Hat)

5 - Sarking

6 - Main Structure

Base Wall Detail

1 - SOLIDAL

2 - Staggered Aluminium Angles

3 - Stiffener for cassettes longer/wider than 600mm

4 - Sub-framing (Top Hat)

5 - Sarking

6 - Main Structure

 
 
 
 
 
 
Technical Specifications

SOLIDAL® T3® (3mm) and T4® (4mm) standard cassette is designed for wet-seal and rainscreen - open joint installation, on external areas such as walls and soffits. Solid Aluminium Cassette is a cost effective solution, that is pre-fabricated in factory environment in modular sizes or according to clients requirements. Delivered directly to site ready for installation or to clients factory for inspection prior to the install process.

SOLIDAL® T3® 

SOLIDAL® T4® 

Panel Thickness (mm)

3mm

4mm

Standard Width (mm)

900mm, 1200mm

900mm, 1200mm

Standard Length (mm)

3000mm, 3600mm

3000mm, 3600mm

Fold size (mm)

20

20

Depth

25mm

25mm

Weight / m2

8.1kg/m2

10.8kg/m2

Pre-drilled Edges

on request

on request

Corner Module

yes

yes

SPECIAL FABRICATION OPTIONS

SOLIDAL® Perforated® and Laser Cut

yes

yes

SOLIDAL® Dimple® and Pressed

yes

yes

SOLIDAL® Instaclad®

yes

yes

SOLIDAL® Pre-curved

no

no

Fabrication
Installation

A large variety of designs can be achieved with SOLIDAL®  pre-fabricated Cassette modules. For large SOLIDAL®  cassette modules, supporting stiffeners are fixed to back of SOLIDAL® sheet, and either spot welded or fixed with structural adhesives, to ensure strength of module and flatness is maintained. The use of additional supporting angles and stiffeners is dependent on size of SOLIDAL® modules.


Contact SOLIDAL® for general guidelines and recommendations.

© 2019 Watermark® International Pty Ltd. All rights reserved.