TECHNICAL DATA SHEETS

SOLIDAL_T3_Tech_Specifications_1.jpg
SOLIDAL_T4_Tech_Specifications_1.jpg
cassettefixing_cover.jpg
TG_cover.jpg
CaptiveExtrusion_3-1.jpg
facefixing_cover.jpg
A5-1-page_Dimple_Pressed_Nov_2018-2.jpg
A5-1-page_PerforatedandLaser-cut_Novembe

SOLIDAL® T3® (3mm) pre-painted Solid Aluminium is semi-finished aluminium product in strip or panel form which has been continuous-coated with high-quality PVDF (Polyvinylidene fluoride) paints. Powder coating and Anodise Finish also available.

View PDF

SOLIDAL® T4® is the only fully certified 4mm Solid Aluminium wall cladding product, produced on a continuous coating line system in *4mm Thickness. Continuous-coated with high-quality PVDF (Polyvinylidene fluoride) paints. SOLIDAL® T4® provides for greater flatness, with unlimited range of solid and metallic colours, stone and wood grain finishes.

Powder coating and Anodise Finish also available.

View PDF

SOLIDAL® T3® (3mm) & T4® (4mm) Solid Aluminium Cassette is a cost effective
solution that is pre-fabricated in a factory environment according to clients
requirements. Delivered directly to site ready for installation or to clients factory
for inspection prior to the install process.

View PDF

SOLIDAL® Panels with pre-edge slot are designed for Tongue and Groove patented installation System. The German awarded Smartfix® System is ideal for new or recladding, due to it’s narrow cladding zone and ease of installation. A wide range of colours and shades can be obtained on the surface of aluminium profiles through the process of electrocolouring. Other available Finish Options are Powder Coating and Untreated Profiles (Mill Finish).

View PDF

SOLIDAL® T3® (3mm) Captive fixing system (patented) has been developed to introduce a more efficient way of creating a facade free of exposed fixings and sealants. Eliminating labour intensive pre-fabrication of the SOLIDAL® materials makes SOLIDAL® Captive System a system of choice for installation contractors, whilst meeting clients budgets.

View PDF

Face Fixing allows SOLIDAL® T3® (3mm) and T4® (4mm) Solid Aluminium to be installed in a few easy steps using rivets or screws. The use of proper Thermal Insulation Panels and Weather Membrane is required. After sized to measure, holes are drilled at marked positions without removing the protective film on SOLIDAL® surface. 

View PDF

3D surface effect on SOLIDAL® T3® (3mm) and T4® (4mm) Solid Aluminium.
Standard Dimple options include 15, 30, 60 and 120mm dimple diameter and 10,
20, 40% Dimpled Percentage.
Customised options and logo stamping are available on request.

View PDF

Limitless design solutions and customised patterns can be achieved with
SOLIDAL® T3® (3mm) and T4® (4mm) Perforated and Laser cut Solid Aluminium.

View PDF

 
SOLIDAL® Brochures
Technical Data Sheets
Application Systems Details
Show More

© 2019 Watermark® International Pty Ltd. All rights reserved.